The 2000 Climb-Rite®

The 2000 Climb-Rite® is a fixed flat rail climbing protection system, that uses a detachable sliding sleeve that rolls freely, both up and down Sellstrom/RTC rail (1/4" x 2"). Though primarily designed for climbing protection on vertical fixed ladders that meet OSHA and ANSI A14.3 standards, it can also be used above and below ground, on interior or exterior surfaces. It is designed to lock the instant after a fall begins, bringing the four hardened steel brakes into contact wiht the rail. The complete climbing system has been designed without rail notches or serrations that corrode and rust. Rail system extensions are available for safe ladder access and egress.










Get A Quote


Ladder fall protection offers

  • Hands-free movement up or down ladder
  • Rail system is easy to install and maintain
  • Climbing device weights only 2 lbs.
  • Arresting unit is easily installed and removed from rail
  • Device available with stainless steel hardware for marine or other corrosive environments
  • Type 316 stainless steel rail is available for marine or other corrosive environments
  • All ladder hardware is corrosion resistant stainless steel
  • Can be mounted to side or center of ladder
  • Ladder extensions available
  • Meets ANSI A14.3, OSHA 1910.27, 1926.1053
  • Easily bolts to existing ladders
  • No caged ladders required with the use of this product
SafeRack Lifeline Fall Protection Systems
Orange. Safety has a new color