IBC Spill Pallet Systems | Containment & Prevention

IBC Spill Pallets

Built for heavy loads and convenient handling, Ultra-Spill Pallets help meet spill containment regulations for up to four drums. High visibility yellow color. Helps comply with SPCC, EPA and UFC spill containment requirements.

Get Started

Ultra-IBC Spill Pallet Plus

  • Low profile, 28" overall height - allows safe and convenient IBC tank handling and dispensing.
  • All polyethylene construction - offers excellent chemical resistance and will not rust or corrode.
  • Forkliftable - allows convenient positioning to desired locations.
  • Low cost design with value-added features and benefits.
  • Large 52" x 52" deck allows safe and convenient placement of IBC tanks.
  • Small footprint - 62" x 62" unit requires minimal floor space.
  • 360-gallon sump capacity meets SPCC and EPA Container Storage Regulations.
  • Optional Pull Over Cover keeps rainwater out of sump and helps comply with Stormwater Management Regulations.
  • Four inner polyethylene columns support uniformly distributed loads of up to 8,500 lbs. All components are easily removed for cleaning.
  • Optional Bucket Shelf captures spills from dispensing. Spills that exceed 3 gallons are channeled into the 360-gallon sump through a bulkhead fitting.

Double Stack IBC Tanks And Save Valuable Floor Space!

  • 16,000 lb. weight capacity accommodates up to two full IBCs.
  • Large 52" x 52" deck allows convenient placement of all sizes and shapes of IBCs
  • 400 Gallon sump capacity meets SPCC and EPA Container Storage Regulations
  • 100% Polyethylene Construction has no metal parts - rust and corrosion are things of the past
Get Started
Get Started

Ultra-Modular IBC Spill Pallets

New Ultra-Modular IBC Spill Pallets provide low cost spill containment for multiple IBC tanks. Standard offerings include: 2-tank, 3-tank, 4-tank and 5-tank indoor and outdoor models. In addition, components may be purchased separately to allow users to "build-your-own" configurations for indoor models.

Each IBC tank sits on a heavy-duty spill pallet that offers a Uniformly Distributed Load Capacity of 9,000 lbs. Each of the low profile spill pallets has a containment capacity of 75-gallons and measures 62" x 62" x 8.75"H.

To increase containment capacity, a 65-gallon capacity Expansion Tank is available. "Flow-through" bulkhead fittings (1.25-inch diameter) are used to connect spill pallets and Expansion Tanks together. This patented feature allows spills to be channeled throughout the containment system, thereby "borrowing" containment capacity from adjacent spill pallets and Expansion Tanks.

Any number of the modular spill pallets can be connected together with the bulkhead fittings. Two (2) bulkhead fittings are used to connect one pallet to the next.

Connecting an Expansion Tank to a spill pallet also requires two (2) bulkhead fittings. Bulkhead fittings are included with each 2-, 3-, 4-, or 5-tank model. Once five (5) or more spill pallets are connected together, the total containment capacity is 375 gallons minimum and does not require use of an Expansion Tank to meet the spill containment regulations.

Optional Extender Kits (Part# 9658) provide for the addition of another compartment to Outdoor Models. (1 tank per Extender Kit). Ultra-Modular IBC Spill Pallets are constructed of 100% polyethylene, eliminating the potential for rust and corrosion. They offer excellent chemical resistance to a broad range of chemicals including acids, solvents and oils.

Indoor Models help facilities comply with newly-revised SPCC (Spill Prevention, Control and Countermeasures) Regulations, EPA Container Storage Regulation 40 CFR 264.175, 264.177(c) and 265.177(c). Outdoor Models comply with these regulations and Stormwater Management Regulations (NPDES). Outdoor Models are considered a "Best Management Practice" (BMP) for providing effective stormwater management.

Talk to an Expert

Ultra-Twin IBC Spill Pallet

  • Use for intermediate bulk containers (IBCs), drums, or other large vessels. (all materials stored must be chemically compatible)
  • Available with optional Bucket Shelf for either or both sides - catches small leaks or spills during dispensing.
  • Grates are easily removed for quick clean up.
  • One continuous sump holds 535 gallons - meets EPA
  • Containment and SPCC Regulations for two IBC tanks.
Get A Quote

Ultra-Twin IBC Spill Pallet

Capture Leaks And Spills Underneath Pallet Racking

  • Upper roll top door and lower swing-out doors combine to allow easy and convenient access to IBC.
  • Safely stores an IBC tank with maximum dimensions of 52" x 52" x 61"
  • Low profile (28" height), 360 gallon containment sump allows safe material handling and dispensing.
  • Forklift capable, lockable, all-polyethylene design will not rust or corrode.
  • Helps meet new Storm-water Management Regulations - NPDES, 40 CFR 122.26.
  • Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175.
Expert Consultation

Ultra-Twin IBC Hard Top

Versatile Secondary Containment For Small Containers And Packages

  • Uses same sump as Ultra-Twin IBC Spill Pallet
  • Unique, lockable, dual closure allows quick access to IBC tanks or drums
  • Roll-top covers can be easily lifted for routine visual inspection
  • Swing-out doors provide safety and convenience for loading / unloading tanks
  • Safely stores IBC tanks with maximum dimensions of 52" x 52" x 61"
  • Meets Stormwater, SPCC and EPA Containment Regulations
  • Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175.

Ultra-Twin IBC Hard Top

  • Capture small leaks and nuisance spills from IBCs
  • Keeps floors free from drips and small spills - eliminates OSHA slip hazards for hazardous and non-hazardous spills.
  • 4-way forklift entry.
  • Translucent sidewalls offer convenient visual leak detection.
  • Large 52" x 52" usable deck space accommodates all sizes and shapes of IBCs
Expert Consultation
NEWS
SafeRack and Atlatl Growth Brings High Tech Opportunity to the Local Area
Created on: 11/21/2014

SafeRack, a leader in custom loading platforms and gangways for truck, railcar and industrial safety applications, and its sister company Atlatl Software, pioneer of the software category Sales Resource Planning (SRP) are helping drive the U.S. manufacturing renaissance.

The companies have been growing substantially over the past year. Atlatl recently announced that it will be expanding to a larger 15,000 square foot office in Charleston, S.C. to house more than 150 employees with capacity to double that amount. Its 1,474 percent growth rate has led to a nationwide hiring initiative to bring artists, animators, human-machine interface designers and software developers, among support staff to the “Silicon Harbor” area...
SafeRack Appoints Jeff Reichert to President
Created on: 11/21/2014

SafeRack, an industry leader specializing in loading rack technologies for trucks, railcars and industrial safety applications, announced the appointment of Jeff Reichert to President. The announcement was made by co-founders Fred Harmon and Rob Honeycutt who said, "Jeff is a tremendous asset to our rapidly growing company, and we anticipate continued growth under his strong leadership."

Mr. Reichert brings more than 28 years operational and P&L experience from several industry verticals including aerospace, machine tools, and critical fluid handling systems for the chemical and industrial business spaces. During his career, he has managed the global activities of business units located in Brazil, China, Europe, India and Japan. Mr. Reichert holds an M.B.A. in Operations Management from Bowling Green State University in Bowling Green, Ohio...