Ultra Inline Spill Deck

When it comes to spill containment, Ultra Inline Spill Deck is the ultimate choice. Super easy to set up, the Ultra Inline Spill Deck provides effective containment by virtue of its spacious spill deck sump and bladder attachment which can hold up to 55 gallons of containment.

[Transcript]: The Ultra Inline Spill Decks provide safe and effective spill containment for up to six 55-gallon drums, without taking up a lot of valuable floor space. Assembling the ultra in-line spill deck is quick and easy.

First put the unit’s side-by-side, next remove the grading from the top of the decks. Place the washer on the included bulkhead fitting and insert into the pre-drilled holes in the decks. Hand tighten the nut on the other end of the bulkhead fitting. Now, replace the grading.

Next, unscrew the nut from the bulkhead fitting on the bladder, keep it in mind that it has left hand threads. Carefully cut the label that holds the access door closed during shipping. Next cut the rubber bands that are around the two ends of the rolled-up bladder. Install the bladder attachment by putting the bulkhead fitting through the pre-drilled hole and hand tighten the nut.

Insert the included T-strip to keep spills from going between the decks. The ultra in-line spill deck is now ready to be used. An optional ramp is available for easier drum loading and unloading. The low-profile five and three-quarter inch hike allows easier drum handling with standard wooden shipping pallets. In case of a drum failure, the leak or spill will first fill up the yellow spill deck sump. The bulkhead fitting that connects units together will allow this spill to travel into the neighboring sump. If additional capacity is necessary for the spill, the bladder attachment will automatically unfurl, providing up to 55 gallons of additional containment.