☰
Home >> Products >> Spill Containment >> Spill Containment Berms and Walls >> Ultra-Containment Berm Foam Model

Ultra-Containment Berm Foam Model

Product Specifications
KEY FEATURES AND BENEFITS

Standard material of construction is PVC or Copolymer 2000™.

SIDEWALLS

COMPLIANCE

Question, Get a Quote, Live Demo or Request an On-Site Visit

Our experts simplify the complex

Order Now
Request On-Site Visit

KEY FEATURES AND BENEFITS

  • Foam section inside of sidewall easily compresses for convenient loading and off-loading.
  • No set-up required – simply unfold for quick deployment. Folded units require minimal storage space.
  • Standard material of construction is PVC or Copolymer 2000™.

SIDEWALLS

  • Foam compresses to allow vehicles or equipment into or out of the Berm.
  • No set-up required once Berm has been positioned in the field.

COMPLIANCE

  • EPA 40 CFR 264.175 Containment of Containers Containing Free Liquid.
  • SPCC – Spill Prevention, Control, and Countermeasure Act

Copolymer 2000™ Part#

PVC 22 oz. Part#

Dimensions ft. (m) Wall Height: 4 in. (102 mm)

Containment Capacity gal. (L)

Copolymer 2000™ Weight lbs. (kg)

PVC 22 oz. Weight lbs. (kg)

8570

8460

4 x 6 (1.2 x 1.8)

59 (223)

27.0 (12.0)

21.0 (9.5)

8571

8461

8 x 8 (2.4 x 2.4)

159 (602)

45.0 (20.0)

40.0 (18.0)

8572

8470

10 x 10 (3.0 x 3.0)

249 (943)

61.0 (28.0)

51.0 (23.0)

8573

8471

10 x 20 (3.0 x 6.1)

498 (1,885)

101.0 (46.0)

83.0 (38.0)

8574

8472

10 x 30 (3.0 x 9.1)

748 (2,832)

137.0 (62.0)

118.0 (54.0)

8575

8473

10 x 40 (3.0 x 12.2)

997 (3,774)

177.0 (80.0)

150.0 (68.0)

8576

8474

10 x 50 (3.0 x 15.2)

1,246 (4,717)

217.0 (98.0)

182.0 (83.0)

8577

8475

12 x 12 (3.7 x 3.7)

359 (1,359)

82.0 (37.0)

63.0 (29.0)

8578

8462

12 x 16 (3.7 x 4.9)

478 (1,809)

97.0 (44.0)

74.0 (33.5)

8579

8476

12 x 20 (3.7 x 6.1)

598 (2,264)

116.0 (53.0)

88.0 (40.0)

8580

8477

12 x 30 (3.7 x 9.1)

897 (3,396)

159.0 (72.0)

120.0 (54.0)

8581

8463

12 x 35 (3.7 x 10.7)

1,047 (3,963)

184.0 (84.0)

138.0 (62.5)

8582

8478

12 x 40 (3.7 x 12.2)

1,196 (4,527)

203.0 (92.0)

152.0 (69.0)

8583

8464

12 x 50 (3.7 x 15.2)

1,496 (5,663)

249.0 (113.0)

187.0 (85.0)

8584

8479

12 x 60 (3.7 x 18.3)

1,795 (6,795)

293.0 (133.0)

219.0 (99.0)

8585

8480

12 x 72 (3.7 x 22.0)

2,154 (8,154)

348.0 (158.0)

260.0 (118.0)

8586

8481

15 x 15 (4.6 x 4.6)

561 (2,124)

104.0 (47.0)

86.0 (39.0)

8587

8482

15 x 20 (4.6 x 6.1)

748 (2,832)

132.0 (60.0)

109.0 (49.0)

8588

8483

15 x 30 (4.6 x 9.1)

1,122 (4,247)

182.0 (83.0)

148.0 (67.0)

8589

8484

15 x 40 (4.6 x 12.2)

1,496 (5,663)

232.0 (105.0)

189.0 (86.0)

8590

8485

15 x 50 (4.6 x 15.2)

1,870 (7,079)

281.0 (128.0)

230.0 (104.0)

8591

8486

15 x 66 (4.6 x 20.1)

2,468 (28,031)

362.0 (164.0)

295.0 (134.0)

8592

8487

15 x 72 (4.6 x 21.9)

2,692 (10,190)

393.0 (178.0)

320.0 (145.0)

PVC Material Specifications

English

Metric

Testing Method

Weight

22 oz./yd2

745 g/m2

FS 5040 / ASTM D3776

Width

up to 126”

up to 320 cm

–

Count

18 x 16/1”

7 x 7/cm

–

Denier

1300 x 1500

1430 x 1650

–

Grab Tensile

459 x 418 lbs./1”

2042 x 1859 N/2.5 cm

FS 5100 / ASTM D5034

Tongue Tear

140 x 150 lbs./1”

623 x 667 N/2.5 cm

FS 5134 / ASTM 2261

Adhesion

22 lbs./2”

98 N/5 cm

FS 5970 / ASTM D751

Finish

Matte

Cold Crack

-30˚F

-34˚C

FS 5874 / ASTM D2136

Treatments

Anti-Mildew, UV Pigments

Put-Up

75 yds

69 m

Copolymer-2000 Material Specs

Base Fabric Type

Polyester

Base Fabric Weight (nominal)

3.0 oz/yd2

102 g/m2

Finished Coated Weight

28.0 ± 2 oz/yd2

950 ± 70 g/m2

ASTM D751

Thickness

30 mils nominal

0.76 mm nominal

ASTM D751

Trapezoid Tear

30/30 lbf nominal

133/133 N nominal

ASTM D4533

Grab Tensile

250/200 lbf min.

1112/890 N min.

ASTM D751 Grab Method

Hydrostatic Resistance

300 psi min.

2.06 MPa min.

ASTM D751, Procedure A

Adhesion

10 lbf/in min.

9.0 daN/5 cm min.

ASTM D751 Dielectric Seam

Cold Crack

Pass @ -25° F

Pass @ -32° C

ASTM D2136 1/8 in mandrel, 4 hr.

Puncture Resistance

50 lbf typical

225 N typical

ASTM D4833

Dead Load

2 in seam, 4 hr, 1 in strip 100 lbf @ 70° F 50 lbf @ 160° F

5 cm seam, 4 hr, 2.5 cm strip 445 N @ 21° C 220 N @ 70° C

ASTM D751

Customer Reviews

5 5
My product was shipped the same day the PO was approved!

The entire process went well. Chris Hite had a quote to me within 30 minutes of consultation. The product was available and the purchase was complete and in route the same day. My product was shipped the same day the PO was approved! Operators await the installation and will breathe a sigh of relief knowing that they are truly grounded when unloading potentially hazardous cargo.

By from International Paper on
4 5
Easy ordering process, for a good price.

Easy ordering process, for a good price, less than other with the same product, and good quality.

By from Inteplast Bags and Films Corporation on
4 5
SafeRack delivers as promised.

As a new purchasing manager here, I was not familiar with SafeRack or your product, but I have received positive feedback from several of our Engineers about the quality and reliability of SafeRack products vs. some other brands. Your sales rep was very helpful and our order was processed and shipped and delivered as promised without any follow-up on our part. SafeRack delivers as promised.

By from Terra Nitrogen, L.P. on
4 5
Very pleased with my salesperson.

I was very pleased with my salesperson, Jason Stewart. He was very knowledgeable and helpful. I liked getting the drawings for approval prior to construction, to ensure I was getting just what I needed. We like the safety protection of the fall cage, the high-visibility color, the ease of movement so that an employee doesn’t have to strain to raise and lower the gangway.

By from Intrepid Potash Wendover, LLC on
5 5
SafeRack provided an efficient and economical way to solve one of our crossover issues.

Quick response from the sales team and very fast delivery on site. We were very pleased with the quality of this product!

By from Marathon Petroleum Co LP on
5 5
SafeRack offered a better delivery time than the competitor.
By from CF INDUSTRIES NITROGEN on
More Reviews
Rated 5/5 based on 851 customer reviews
 
Exit mobile version