Both the polyethylene and composite railcar track pans offered by SafeRack are high flow rate track pans designed for larger spill containment systems. Cost-effective and easy to install, both types of track pan come fully SPCC compliant.
Polyethylene & Composite Railcar Track Pans
Question, Get a Quote, Live Demo or Request an On-Site Visit
Our experts simplify the complex
Polyethylene Railcar Track Pans
SafeRack provides high flow rate track pans for applications requiring capacity for larger spill containment system. They are SPCC compliant and feature:
+ 2 or 3-pan system
+ 4 1/2′ module sections
+ Self-draining, below grade piping
+ High flow rate
+ Optional rain covers
+ Low cost installation
Composite Railcar Track Pans
SafeRack provides high flow rate railcar track pans for applications requiring capacity for larger spill containment system. They are SPCC compliant and feature:
+ Easy installation – minimal site preparation (no excavation) required.
+ Constructed with high strength, non-porous, corrosion resistant fiberglass.
+ Low profile: 20’ long x 4-7/8” high
+ Pandrol compatible
+ Unique stormwater feature designed to eliminate “pooling”
+ Low cost installation without the need of heavy equipment
Ultra-Track Modular, 20-foot Railcar Spill Containment Pans
UltraTech is introducing their newest product, the Ultra-Track Railcar Pan, a 20-foot modular spill containment pan that is easy to install and effective to use. The pan can be designed to almost any length and is constructed of high-strength, non-porous, corrosion resistant fiberglass that will provide years of reliable service. Its low profile keeps the site preparation required for install to a minimum. Custom rail side gaskets prevent leaks and the drainage manifold comes standard with a clean out port to allow for removal of sludge blockages. The Ultra-Track makes use of cutting edge flow-through technology, which allows for increased containment capacity while minimizing cleanup of smaller spills.
Track Pans with Grates, No Covers
| Part # | Description | Dimensions | Weight | Containment Capacity | Includes |
|---|---|---|---|---|---|
| 9566 | Center Track Pan with Grates | 53½” x 53½” x 6″ (1359 mm x 1359 mm x 153 mm) | 112 lbs. (51 kg) | 18 gallons (69 L)* | 2 bulkhead fittings, 4 gaskets and 2 grates |
| 9576 | Side Track Pan with Grates | 53½” x 27½” x 6″ (1359 mm x 699 mm x 153 mm) | 58 lbs. (26 kg) | 19 gallons (72 L)* | 1 bulkhead fitting, 2 gaskets and 1 grate |
Track Pans Covers Only
| Part # | Description | Dimensions | Weight |
|---|---|---|---|
| 9580 | Cover for Center Track Pan | 55″ x 52 1/2″ (1397 mm x 1333 mm) | 24 lbs. (11 kg) |
| 9581 | Cover for Side Track Pan | 55″ x 28 1/4″ (1397 mm x 717 mm) | 11 lbs. (5 kg) |
Complete Railroad Spill Containment Systems
| Part # | Description | Containment System Length |
|---|---|---|
| 9595 | Two (2) Center Pans, four (4) Side Pans. No covers | 9-Foot |
| 9596 | Two (2) Center Pans with Covers, four (4) Side Pans with Covers | 9-Foot |
| 9589 | Nine (9) Center Pans, eighteen (18) Side Pans. No covers | 40-Foot |
| 9590 | Nine (9) Center Pans with Covers, eighteen (18) Side Pans with Covers | 40-Foot |
| 9592 | Fourteen (14) Center Pans, twenty-eight (28) Side Pans. No covers | 60-Foot |
| 9593 | Fourteen (14) Center Pans with Covers, twenty-eight (28) Side Pans with Covers | 60-Foot |
Options
| Part # | Description |
|---|---|
| 9584 | Rebar Fasteners with Protective Caps (20-pack) |
| 9559 | 3″ dia. Bulkhead Fitting (for below-grade piping) |
| 9571 | Grate Only for Center Pan (Left) |
| 9572 | Grate Only for Center Pan (Right) |
| 9573 | Grate Only for Side Pan |
Chemical Compatibility Guide
Track Pans, Composite Model, Standard Resin
For standard Composite Track Pans
This listing was prepared to provide guidance to the chemical compatibility of Ultra-Track Pans, Composite Model.
The standard resin used in the fiberglass composite is susceptible to attack by some chemicals which may cause stress cracking, swelling, oxidation or may permeate the containment. These reactions may reduce the physical properties of the composite.
When considering an UltraTech Composite Track Pan for use in secondary containment applications, it is important to note that most secondary containment products are designed to hold leaked chemicals for only hours, a day, at most a week. These secondary containment units would then be cleaned of any chemical. In these short-term applications, a greater variety of chemicals may be used with the standard fiberglass composite since the exposure time of the chemical to the resin is limited.
| Chemical | Rating | Max Temp. |
|
Acetic Acid, <10% |
Acceptable |
150˚F (66˚C) |
|
Acetic Acid, 10-25% |
Acceptable |
125˚F (52˚C) |
|
Acetic Acid, 25-50% |
Acceptable |
90˚F (32˚C) |
|
Acetone |
Not Recommended | |
|
Acetonitrile |
Not Recommended | |
|
Acrylic Acid |
Not Recommended | |
|
Acrylonitrile |
Not Recommended | |
|
Alum, Potassium |
Acceptable |
160˚F (71˚C) |
|
Aluminum Chloride |
Acceptable |
120˚F (49˚C) |
|
Aluminum Potassium Sulfate |
Acceptable |
160˚F (71˚C) |
|
Aluminum Sulfate |
Acceptable |
240˚F (116˚C) |
|
Ammonia |
Acceptable |
90˚F (32˚C) |
|
Ammonium Acetate |
Not Recommended | |
|
Ammonium Bicarbonate, <15% |
Acceptable |
140˚F (60˚C) |
|
Ammonium Bicarbonate, >15% |
Acceptable |
140˚F (60˚C) |
|
Ammonium Carbonate |
Acceptable |
120˚F (49˚C) |
|
Ammonium Chloride |
Acceptable |
190˚F (88˚C) |
|
Ammonium Hydroxide, 1% |
Acceptable |
180˚F (82˚C) |
|
Ammonium Hydroxide, 5% |
Acceptable |
90˚F (32˚C) |
|
Ammonium Hydroxide, 10% |
Acceptable |
90˚F (32˚C) |
|
Ammonium Hydroxide, >20% |
Not Recommended | |
|
Ammonium Nitrate |
Acceptable |
190˚F (88˚C) |
|
Ammonium Persulfate |
Acceptable |
150˚F (66˚C) |
|
Ammonium Phosphate |
Not Recommended | |
|
Ammonium Sulfate |
Acceptable |
120˚F (49˚C) |
|
Ammonium Thiocyanate |
Acceptable |
120˚F (49˚C) |
|
Ammonium Thiosulfate |
Not Recommended | |
|
Amyl Acetate |
Acceptable |
90˚F (32˚C) |
|
Amyl Alcohol |
Acceptable |
200˚F (93˚C) |
|
Amyl Chloride |
Not Recommended | |
|
Anaerobic Sewage |
Acceptable |
80˚F (27˚C) |
|
Aniline Sulfate |
Acceptable |
150˚F (66˚C) |
|
Anthracene Oil, 6% |
Acceptable |
90˚F (32˚C) |
|
Antimony Pentachloride |
Acceptable |
90˚F (32˚C) |
|
Antimony Trichloride |
Acceptable |
180˚F (82˚C) |
|
Barium Acetate |
Not Recommended | |
|
Barium Carbonate |
Acceptable |
180˚F (82˚C) |
|
Barium Chloride |
Acceptable |
200˚F (93˚C) |
|
Barium Sulfate |
Acceptable |
150˚F (66˚C) |
|
Barium Sulfide |
Not Recommended | |
|
Benzaldehyde |
Not Recommended | |
|
Benzene |
Acceptable |
90˚F (32˚C) |
|
Benzene Sulfonic Acid, 30% |
Acceptable |
180˚F (82˚C) |
|
Benzene Sulfonic Acid, 100% |
Acceptable |
90˚F (32˚C) |
|
Benzoic Acid |
Acceptable |
250˚F (121˚C) |
|
Benzotrichloride |
Not Recommended | |
|
Benzyl Alcohol |
Not Recommended | |
|
Boric Acid |
Acceptable |
180˚F (82˚C) |
|
Butyl Acetate |
Acceptable |
90˚F (32˚C) |
|
Butyl Alcohol |
Acceptable |
190˚F (88˚C) |
|
Butylene Glycol |
Acceptable |
120˚F (49˚C) |
|
Butyric Acid, <70% |
Acceptable |
120˚F (49˚C) |
|
Calcium Bisulfate |
Acceptable |
170˚F (77˚C) |
|
Calcium Carbonate |
Acceptable |
160˚F (71˚C) |
|
Calcium Chlorate |
Acceptable |
180˚F (82˚C) |
|
Calcium Chloride |
Acceptable |
250˚F (121˚C) |
|
Calcium Hydroxide |
Acceptable |
160˚F (71˚C) |
|
Calcium Nitrate |
Acceptable |
180˚F (82˚C) |
|
Calcium Sulfate |
Acceptable |
200˚F (93˚C) |
|
Caprylic Acid |
Acceptable |
160˚F (71˚C) |
|
Carbon Disulfide |
Not Recommended | |
|
Carbonic Acid |
Acceptable |
160˚F (71˚C) |
|
Chloroacetic Acid |
Not Recommended | |
|
Chlorobenzene |
Not Recommended | |
|
Citric Acid |
Acceptable |
200˚F (93˚C) |
|
Copper Acetate |
Acceptable |
120˚F (49˚C) |
|
Copper Chloride |
Acceptable |
250˚F (121˚C) |
|
Copper Cyanide |
Acceptable |
90˚F (32˚C) |
|
Copper Nitrate |
Acceptable |
160˚F (71˚C) |
|
Copper Sulfate |
Acceptable |
250˚F (121˚C) |
|
Cresols |
Not Recommended | |
|
Dibutyl Ether |
Acceptable |
80˚F (27˚C) |
|
Diesel Fuel |
Acceptable |
100˚F (38˚C) |
|
Diethylene Glycol |
Acceptable |
250˚F (121˚C) |
|
Dioctyl Phthalate |
Not Recommended | |
|
Diphenyl Ether |
Not Recommended | |
|
Diphenyl Oxide |
Not Recommended | |
|
Dipropylene Glycol |
Acceptable |
160˚F (71˚C) |
|
Dodecene |
Not Recommended | |
|
Ethyl Acetate |
Not Recommended | |
|
Ethylbenzene |
Not Recommended | |
|
Ethyl Ether |
Not Recommended | |
|
Ethylene Dibromide |
Not Recommended | |
|
Ethylene Glycol |
Acceptable |
250˚F (121˚C) |
|
Fatty Acids |
Acceptable |
250˚F (121˚C) |
|
Ferric Chloride |
Acceptable |
250˚F (121˚C) |
|
Ferric Nitrate |
Acceptable |
250˚F (121˚C) |
|
Ferric Sulfate |
Acceptable |
200˚F (93˚C) |
|
Ferrous Chloride |
Acceptable |
210˚F (99˚C) |
|
Ferrous Nitrate |
Acceptable |
160˚F (71˚C) |
|
Ferrous Sulfate |
Acceptable |
210˚F (99˚C) |
|
Formaldehyde, <25% |
Acceptable |
200˚F (93˚C) |
|
Formaldehyde, 25-50% |
Acceptable |
90˚F (32˚C) |
|
Formic Acid, <10% |
Acceptable |
200˚F (93˚C) |
|
Formic Acid, 10-50% |
Acceptable |
90˚F (32˚C) |
|
Formic Acid, >50% |
Not Recommended | |
|
Furfural, 5% |
Acceptable |
90˚F (32˚C) |
|
Furfural, >5% |
Not Recommended | |
|
Gluconic Acid, 50% |
Acceptable |
120˚F (49˚C) |
|
Glucose |
Acceptable |
180˚F (82˚C) |
|
Glycerine |
Acceptable |
200˚F (93˚C) |
|
Glycolic Acid, <35% |
Acceptable |
140˚F (60˚C) |
|
Glycolic Acid, 35-70% |
Acceptable |
120˚F (49˚C) |
|
Heptane |
Acceptable |
120˚F (49˚C) |
|
Hydrobromic Acid, <25% |
Acceptable |
160˚F (71˚C) |
|
Hydrogen Bromide |
Acceptable |
90˚F (32˚C) |
|
Hydroxyacetic Acid, <35% |
Acceptable |
140˚F (60˚C) |
|
Hydroxyacetic Acid, 35-70% |
Acceptable |
120˚F (49˚C) |
|
Hypochlorous Acid |
Acceptable |
90˚F (32˚C) |
|
Iron Percloride, 20% |
Acceptable |
140˚F (60˚C) |
|
Isopropyl Alcohol |
Acceptable |
90˚F (32˚C) |
|
Isopropyl Palmitate |
Acceptable |
180˚F (82˚C) |
|
Kerosene |
Acceptable |
120˚F (49˚C) |
|
Lactic Acid |
Acceptable |
200˚F (93˚C) |
|
Lead Acetate |
Acceptable |
180˚F (82˚C) |
|
Lime Slurry |
Acceptable |
180˚F (82˚C) |
|
Lithium Chloride |
Acceptable |
180˚F (82˚C) |
|
Magnesium Bicarbonate |
Acceptable |
150˚F (66˚C) |
|
Magnesium Carbonate |
Acceptable |
160˚F (71˚C) |
|
Magnesium Chloride |
Acceptable |
220˚F (104˚C) |
|
Magnesium Nitrate |
Acceptable |
160˚F (71˚C) |
|
Magnesium Sulfate |
Acceptable |
200˚F (93˚C) |
|
Mercuric Chloride |
Acceptable |
210˚F (99˚C) |
|
Mercurous Chloride |
Acceptable |
210˚F (99˚C) |
|
Mercury |
Acceptable |
250˚F (121˚C) |
|
Methanol, 20% |
Acceptable |
90˚F (32˚C) |
|
Methyl Ethyl Ketone (MEK) |
Not Recommended | |
|
Methylene Chloride |
Not Recommended | |
|
Mineral Oils |
Acceptable |
180˚F (82˚C) |
|
Monochlorinebenzene |
Not Recommended | |
|
Monoethanolamine |
Not Recommended | |
|
Naptha |
Acceptable |
200˚F (93˚C) |
|
Napthalene |
Acceptable |
130˚F (54˚C) |
|
Nickel Chloride |
Acceptable |
220˚F (104˚C) |
|
Nickel Nitrate |
Acceptable |
220˚F (104˚C) |
|
Nickel Sulfate |
Acceptable |
220˚F (104˚C) |
|
Nitric Acid, 10% |
Acceptable |
175˚F (79˚C) |
|
Nitrous Acid, 10% |
Acceptable |
95˚F (35˚C) |
|
Oleic Acid |
Acceptable |
200˚F (93˚C) |
|
Oxalic Acid |
Acceptable |
220˚F (104˚C) |
|
Palmitic Acid |
Acceptable |
160˚F (71˚C) |
|
Perchloroethylene |
Not Recommended | |
|
Phenol |
Not Recommended | |
|
Phosphate Salts, 25% |
Acceptable |
90˚F (32˚C) |
|
Phosphoric Acid, 85% |
Acceptable |
220˚F (104˚C) |
|
Phosphorous Trichloride |
Not Recommended | |
|
Phthalic Anhydride |
Acceptable |
150˚F (66˚C) |
|
Picric Acid, 10% |
Acceptable |
100˚F (38˚C) |
|
Polyvinyl Acetate Emulsion |
Acceptable |
100˚F (38˚C) |
|
Polyvinyl Alcohol |
Acceptable |
90˚F (32˚C) |
|
Potassium Aluminum Sulfate |
Acceptable |
160˚F (71˚C) |
|
Potassium Bicarbonate |
Acceptable |
90˚F (32˚C) |
|
Potassium Carbonate |
Acceptable |
90˚F (32˚C) |
|
Potassium Chloride |
Acceptable |
200˚F (93˚C) |
|
Potassium Ferricyanide |
Acceptable |
200˚F (93˚C) |
|
Potassium Ferrocyanide |
Acceptable |
200˚F (93˚C) |
|
Potassium Nitrate |
Acceptable |
200˚F (93˚C) |
|
Potassium Permanganate |
Acceptable |
150˚F (66˚C) |
|
Potassium Persulfate |
Acceptable |
90˚F (32˚C) |
|
Potassium Sulfate |
Acceptable |
200˚F (93˚C) |
|
Propylene Glycol |
Acceptable |
170˚F (77˚C) |
|
Silver Nitrate |
Acceptable |
200˚F (93˚C) |
|
Sodium Acetate |
Acceptable |
150˚F (66˚C) |
|
Sodium Aluminate |
Not Recommended | |
|
Sodium Benzoate |
Acceptable |
175˚F (79˚C) |
|
Sodium Bicarbonate |
Acceptable |
150˚F (66˚C) |
|
Sodium Bisulfate |
Acceptable |
200˚F (93˚C) |
|
Sodium Bisulfite |
Acceptable |
200˚F (93˚C) |
|
Sodium Borate |
Acceptable |
170˚F (77˚C) |
|
Sodium Bromide |
Acceptable |
220˚F (104˚C) |
|
Sodium Carbonate |
Acceptable |
90˚F (32˚C) |
|
Sodium Chlorate |
Acceptable |
90˚F (32˚C) |
|
Sodium Chloride |
Acceptable |
200˚F (93˚C) |
|
Sodium Chlorite, 25% |
Acceptable |
175˚F (79˚C) |
|
Sodium Cyanide |
Acceptable |
100˚F (38˚C) |
|
Sodium Ferricyanide |
Acceptable |
220˚F (104˚C) |
|
Sodium Ferrocyanide |
Acceptable |
220˚F (104˚C) |
|
Sodium Hydroxide, 5% |
Acceptable |
175˚F (79˚C) |
|
Sodium Hypochlorite (Bleach) |
Not Recommended | |
|
Sodium Monophosphate |
Acceptable |
150˚F (66˚C) |
|
Sodium Nitrate |
Acceptable |
220˚F (104˚C) |
|
Sodium Sulfate |
Acceptable |
180˚F (82˚C) |
|
Sodium Sulfide |
Acceptable |
90˚F (32˚C) |
|
Sodium Thiosulfate |
Acceptable |
90˚F (32˚C) |
|
Sodium Tripolyphosphate |
Acceptable |
125˚F (52˚C) |
|
Styrene |
Not Recommended | |
|
Sulfuric Acid, <5% |
Acceptable |
210˚F (99˚C) |
|
Sulfuric Acid, 5-50% |
Acceptable |
200˚F (93˚C) |
|
Sulfuric Acid, >50% |
Not Recommended | |
|
Sulfurous Acid, 10% |
Acceptable |
90˚F (32˚C) |
|
Tannic Acid |
Acceptable |
200˚F (93˚C) |
|
Tartaric Acid |
Acceptable |
220˚F (104˚C) |
|
Toluene |
Acceptable |
90˚F (32˚C) |
|
Triphenyl Phosphate |
Acceptable |
90˚F (32˚C) |
|
Turpentine |
Acceptable |
90˚F (32˚C) |
|
Urea |
Acceptable |
90˚F (32˚C) |
|
Xylene |
Acceptable |
90˚F (32˚C) |
|
Zinc Chloride |
Acceptable |
200˚F (93˚C) |
|
Zinc Hydrosulfite |
Acceptable |
160˚F (71˚C) |
|
Zinc Nitrate |
Acceptable |
180˚F (82˚C) |
|
Zinc Sulfate |
Acceptable |
200˚F (93˚C) |
|
Zinc Sulfite |
Acceptable |
150˚F (66˚C) |
Installation Gallery
Customer Reviews
5
5
The product was delivered like a cheetah with a booster rocket attached to it’s back!
The product was delivered like a cheetah with a booster rocket attached to it’s back! I’ve found that I never have to look for another supplier for anything having to do with loading or unloading racks again. What’s left to say? Buy from SafeRack! You will be completely satisfied.
5
5
Metal safety cage
Good quality products!
4
5
We prefer to use SafeRack than a solution that doesn’t last and is not certified.
We prefer to use normalized equipment with an expert like SafeRack, than some patch up solution that doesn’t survive time and is not certified. Plus, our SafeRack representative, John Nance, took care to keep us informed of the project status every step of the way.
5
5
Our orders are always delivered on time.
Our orders are always delivered on time. Sometimes we request delivery dates that are out a month or two and it’s never a problem to have them delivered when we need them…we are happy with the product, delivery, and with communication with customer service and sales.
4
5
For the springs, I liked the fact that they came as matched pairs.
For the springs, I liked the fact that they came as matched pairs. For the swivel seal kits I liked the fact that they were inexpensive compared to the entire swivel joint. They provide short term repair potential in the event of failure of the primary installed components.
5
5
The gangway arrived promptly, within the time given.
The gangway arrived promptly, within the time given. My salesperson was very responsive and presented no obstacles during the purchase process.