Home >> Products >> Spill Containment >> Spill Containment Berms and Walls >> Ultra-Containment Berm

Ultra-Containment Berm

UltraTech

KEY FEATURES AND BENEFITS

• Entry and exit walls are supported every 12” with a patented “living hinge”.

• Once a vehicle has entered or exited, the walls automatically spring back to their vertical position.

• Standard materials of construction are Copolymer 2000™.

COMPLIANCE

• EPA 40 CFR 264.175 Containment of Containers Containing Free

View Full Text

Question, Get a Quote, Live Demo or Request an On-Site Visit

Our experts simplify the complex

Order Now

Request On-Site Visit

UltraTech

KEY FEATURES AND BENEFITS

• Entry and exit walls are supported every 12” with a patented “living hinge”.

• Once a vehicle has entered or exited, the walls automatically spring back to their vertical position.

• Standard materials of construction are Copolymer 2000™.

COMPLIANCE

• EPA 40 CFR 264.175 Containment of Containers Containing Free

View Full Text

SET UP AND HANDLING

The rugged construction of the Ultra-Containment Berm, Ultimate Model offers excellent chemical resistance and durability. To ensure the longest life and most eff ective use of the Ultimate Model Berm, setup and handling are key.

The following guidelines are provided to ensure that you get the best results.

DEPLOYMENT:

1. Select a level area and be sure that ground is swept clean of debris and sharp objects.
2. The use of a ground tarp is recommended.
3. Place the folded Berm at the setup location. Do not drag the folded Berm. Unfold Berm and position as desired. Position the frame legs facing toward the inside of the Berm. On the shorter ends insert the green urethane stakes through the oval shaped holes in the bottom of the Berm, through the black polyethylene base plates and into the pockets at the top of the wall. Firmly seat stakes. (This step is required only at first setup.)
4. If Track Belts are being used, place these in the unit at this time.
5. The Berm is ready for use.

STORAGE:

1. Sweep out Berm and be sure that it is dry and free of contaminates.
2. Store unit in clean dry environment.

REPAIR AND MAINTENANCE:

1. If a puncture or tear occurs, contact your distributor for a Repair Kit. Describe the damage to the service representative to ensure receipt of the proper kit.
2. Replacement frame assemblies and urethane stakes are available from your distributor

Reinforced	English	Metric	Testing Method
Base Fabric Type	Polyester
Base Fabric Weight (nominal)	3.0 oz/yd2	102 g/m2
Finished Coated Weight	28.0 ± 2 oz/yd2	950 ± 70 g/m2	ASTM D751
Thickness	30 mils nominal	0.76 mm nominal	ASTM D751
Trapezoid Tear	30/30 lbf nominal	133/133 N nominal	ASTM D4533
Grab Tensile	250/200 lbf min.	1112/890 N min.	ASTM D751 Grab Method
Hydrostatic Resistance	300 psi min.	2.06 MPa min.	ASTM D751, Procedure A
Adhesion	10 lbf/in min.	9.0 daN/5 cm min.	ASTM D751 Dielectric Seam
Cold Crack	Pass @ -25° F	Pass @ -32° C	ASTM D2136 1/8 in mandrel, 4 hr.
Puncture Resistance	50 lbf typical	225 N typical	ASTM D4833
Dead Load	2 in seam, 4 hr, 1 in strip 100 lbf @ 70° F 50 lbf @ 160° F	5 cm seam, 4 hr, 2.5 cm strip 445 N @ 21° C 220 N @ 70° C	ASTM D751